3D-Printing to Plan Complex Transcatheter Paravalvular Leaks Closure - IMT Mines Alès Accéder directement au contenu
Article Dans Une Revue Journal of Clinical Medicine Année : 2022

3D-Printing to Plan Complex Transcatheter Paravalvular Leaks Closure

Résumé

Background: Percutaneous closure of paravalvular leak (PVL) has emerged as an alternative to surgical management in selected cases. Achieving complete PVL occlusion, while respecting prosthesis function remains challenging. A multimodal imaging analysis of PVL morphology before and during the procedure is mandatory to select an appropriate device. We aim to explore the additional value of 3D printing in predicting device related adverse events including mechanical valve leaflet blockade, risk of device embolization and residual shunting. Methods: From the FFPP registries (NCT05089136 and NCT05117359), we included 11 transcatheter PVL closure procedures from three centers for which 3D printed models were produced. Cardiac CT was used for segmentation for 3D printed models (3D-heartmodeling, Caissargues, France). Technology used a laser to fuse very fine powders (TPU Thermoplastic polyurethane) into a final part-laser sintering technology (SLS) with an adapted elasticity. A simulation on 3D printed model was performed using a set of occluders. Results: PVLs were located around aortic prostheses in six cases, mitral prostheses in four cases and tricuspid ring in one case. The device chosen during the simulation on the 3D printed model matched the one implanted in eight cases. In the three other cases, a similar device type was chosen during the procedures but with a different size. A risk of prosthesis leaflet blockade was identified on 3D printed models in four cases. During the procedure, the occluder was removed before release in one case. In another case the device was successfully repositioned and released. In two patients, leaflet impingement was observed post-operatively and surgical device removal had to be performed. Conclusion: In a case-series of complex transcatheter PVL closure procedures, hands-on simulation testing on 3D printed models proved its usefulness to plan and facilitate these challenging procedures.
Fichier principal
Vignette du fichier
jcm-11-04758-v2-1.pdf (17.54 Mo) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte

Dates et versions

hal-03790774 , version 1 (28-09-2022)

Identifiants

Citer

Vlad Ciobotaru, Victor-Xavier Tadros, Marcos Batistella, Eric Maupas, Romain Gallet, et al.. 3D-Printing to Plan Complex Transcatheter Paravalvular Leaks Closure. Journal of Clinical Medicine, 2022, 11 (16), pp.4758. ⟨10.3390/jcm11164758⟩. ⟨hal-03790774⟩
21 Consultations
24 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More