A. Aldrian, A. Ledersteger, and R. Pomberger, Monitoring of WEEE plastics in regards to brominated flame retardants using handheld XRF, Waste Manag, vol.36, pp.297-304, 2015.

N. S. Allen, M. Edge, T. Corrales, A. Childs, C. M. Liauw et al., Ageing and stabilisation of filled polymers: an overview, Polym. Degrad. Stab, vol.61, pp.114-120, 1998.

A. R. Ashkiki, C. Felske, and D. Mccartney, Impacts of seasonal variation and operating parameters on double-stage trommel performance, Waste Manag, vol.86, pp.36-48, 2019.

J. Bae, S. Oh, W. Pedrycz, and Z. Fu, Design of fuzzy radial basis function neural network classifier based on information data preprocessing for recycling black plastic wastes: comparative studies of ATR FT-IR and Raman spectroscopy, Appl. Intell, vol.49, pp.929-949, 2019.

S. Barbier, S. Perrier, P. Freyermuth, D. Perrin, B. Gallard et al., Plastic identification based on molecular and elemental information from laser induced breakdown spectra: a comparison of plasma conditions in view of efficient sorting, Spectrochim. Acta -Part B At. Spectrosc, vol.88, pp.167-173, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00905757

W. Becker, K. Sachsenheimer, and M. Klemenz, Detection of black plastics in the middle infrared spectrum (MIR) using photon up-conversion technique for polymer recycling purposes, Polymers (Basel), vol.9, p.435, 2017.

J. Beigbeder, D. Perrin, J. Mascaro, and J. Lopez-cuesta, Study of the physicochemical properties of recycled polymers from waste electrical and electronic equipment (WEEE) sorted by high resolution near infrared devices, Resour. Conserv. Recycl, vol.78, pp.105-114, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02536526

L. Bokobza, J. L. Bruneel, and M. Couzi, Raman spectroscopic investigation of carbonbased materials and their composites. Comparison between carbon nanotubes and carbon black, Chem. Phys. Lett, vol.590, pp.153-159, 2013.

L. Delva, S. Hubo, L. Cardon, and K. Ragaert, On the role of flame retardants in mechanical recycling of solid plastic waste, Waste Manag, vol.82, pp.198-206, 2018.

W. H. Fletcher and J. S. Rayside, High resolution vibrational Raman spectrum of oxygen, J. Raman Spectrosc, vol.2, pp.3-14, 1974.

J. Florestan, A. Lachambre, N. Mermilliod, J. C. Boulou, and C. Marfisi, Recycling of plastics: automatic identification of polymers by spectroscopic methods, Resour. Conserv. Recycl, vol.10, pp.90039-90045, 1994.

C. Gallen, A. Banks, S. Brandsma, C. Baduel, P. Thai et al., Towards development of a rapid and effective non-destructive testing strategy to identify brominated flame retardants in the plastics of consumer products, Sci. Total Environ, pp.255-265, 2014.

M. R. Gent, M. Menendez, J. Toraño, and I. Diego, Recycling of plastic waste by density separation: prospects for optimization, Waste Manag. Res, vol.27, pp.175-187, 2009.

G. Grause, J. D. Fonseca, H. Tanaka, T. Bhaskar, T. Kameda et al., A novel process for the removal of bromine from styrene polymers containing brominated flame retardant, Polym. Degrad. Stab, vol.112, pp.86-93, 2015.

S. Grégoire, M. Boudinet, F. Pelascini, F. Surma, V. Detalle et al., Laserinduced breakdown spectroscopy for polymer identification, Anal. Bioanal. Chem, vol.400, pp.3331-3340, 2011.

S. P. Gundupalli, S. Hait, and A. Thakur, A review on automated sorting of sourceseparated municipal solid waste for recycling, Waste Manag, vol.60, pp.56-74, 2017.

A. Guzzonato, H. Mehlmann, D. Krumwiede, and S. Harrad, A novel method for quantification of decabromodiphenyl ether in plastics without sample preparation using direct insertion probe -magnetic sector high resolution mass spectrometry, Anal. Methods, vol.8, pp.5487-5494, 2016.

A. Guzzonato, F. Puype, and S. J. Harrad, Improving the accuracy of hand-held X-ray fluorescence spectrometers as a tool for monitoring brominated flame retardants in waste polymers, Chemosphere, vol.159, pp.89-95, 2016.

A. R. Hasan, H. Solo-gabriele, and T. Townsend, Online sorting of recovered wood waste by automated XRF-technology: Part II. Sorting efficiencies, Waste Manag, vol.31, pp.695-704, 2011.

P. Hennebert and M. Filella, WEEE plastic sorting for bromine essential to enforce EU regulation, Waste Manag, vol.71, pp.390-399, 2018.
URL : https://hal.archives-ouvertes.fr/ineris-01853528

J. M. Hollas, Modern Spectroscopy, Fourth, 2004.

M. Z. Hossain, Y. Yuan, and A. S. Teja, Measurement of enthalpies of association between CO2 and polymers via in situ ATR-FTIR spectroscopy, J. Supercrit. Fluids, vol.95, pp.457-461, 2014.

J. Huang, C. Tian, J. Ren, and Z. Bian, Study on Impact Acoustic-Visual Sensor-Based Sorting of ELV Plastic Materials, Sensors, vol.17, 1325.

T. Huth-fehre, R. Feldhoff, T. Kantimm, L. Quick, F. Winter et al., NIR -Remote sensing and artificial neural networks for rapid identification of Post Consumer Plastics, J. Mol. Struct, vol.348, pp.143-146, 1995.

M. Kang, Y. Heo, F. Jin, and S. Park, A review: role of interfacial adhesion between carbon blacks and elastomeric materials, Carbon Lett, vol.18, pp.1-10, 2016.

A. Kassouf, J. Maalouly, D. N. Rutledge, H. Chebib, and V. Ducruet, Rapid discrimination of plastic packaging materials using MIR spectroscopy coupled with independent components analysis (ICA), Waste Manag, vol.34, pp.2131-2138, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01173836

J. Keeler, Fourier transformation and data processing, 2004.

G. B. Krivtsova, A. N. Pimenov, and V. V. Petukhov, Electromagnetic separation of nonferrous metals before a metallurgical conversion in a field of high-frequency current, Metallurgist, vol.53, pp.524-530, 2009.

J. Kuang, M. A. Abdallah, . .-e, and S. Harrad, Brominated flame retardants in black plastic kitchen utensils: concentrations and human exposure implications, Sci. Total Environ, pp.1138-1146, 2018.

A. Küter, S. Reible, T. Geibig, D. Nüßler, and N. Pohl, THz imaging for recycling of black plastics. tm -Tech, Mess, vol.85, pp.191-201, 2018.

H. Langhals, D. Zgela, and T. Schlücker, High performance recycling of polymers by means of their fluorescence lifetimes, Green Sustain. Chem, vol.04, pp.144-150, 2014.

E. B. Ledford, R. L. White, S. Ghaderi, M. L. Gross, and C. L. Wilkins, Convolutionbased phase correction in Fourier transform mass spectrometry, Anal. Chem, vol.52, pp.1090-1094, 1980.

R. Leitner, H. Mairer, and A. Kercek, Real-time classification of polymers with NIR spectral imaging and blob analysis, Real-Time Imaging, vol.9, pp.245-251, 2003.

Y. Li, X. Huang, L. Zeng, R. Li, H. Tian et al., A review of the electrical and mechanical properties of carbon nanofiller-reinforced polymer composites, J. Mater. Sci, vol.54, pp.1036-1076, 2019.

M. Liu and A. Horrocks, Effect of Carbon Black on UV stability of LLDPE films under artificial weathering conditions, Polym. Degrad. Stab, vol.75, pp.485-499, 2002.

X. Liu, X. Zhang, K. Zhang, and C. Qi, Sodium persulfate-assisted mechanochemical degradation of tetrabromobisphenol A: efficacy, products and pathway, Chemosphere, vol.150, pp.551-558, 2016.

C. Ma, J. Yu, B. Wang, Z. Song, J. Xiang et al., Chemical recycling of brominated flame retarded plastics from e-waste for clean fuels production: a review, Renew. Sustain. Energy Rev, vol.61, pp.433-450, 2016.

E. Maris, P. Botané, P. Wavrer, and D. Froelich, Characterizing plastics originating from WEEE: A case study in France, Miner. Eng, vol.76, pp.28-37, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01206310

J. Maris, S. Bourdon, J. Brossard, L. Cauret, L. Fontaine et al., Mechanical recycling: Compatibilization of mixed thermoplastic wastes, Polym. Degrad. Stab, vol.147, pp.245-266, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01902800

M. Mazaheri, G. R. Johnson, and L. Morawska, Application of bag sampling technique for particle size distribution measurements, J. Environ. Monit, vol.11, 2009.

M. B. Mesina, T. P. Jong, and W. L. Dalmijn, Automatic sorting of scrap metals with a combined electromagnetic and dual energy X-ray transmission sensor, Int. J. Miner. Process, vol.82, pp.222-232, 2007.

T. Otake, N. Itoh, M. Ohata, and N. Hanari, Optimization of Microwave-Assisted Extraction for the Determination of Organic Flame Retardants in Acrylonitrile Butadiene Styrene, Anal. Lett, vol.48, pp.2319-2328, 2015.

J. R. Peeters, P. Vanegas, L. Tange, J. Van-houwelingen, and J. R. Duflou, Closed loop recycling of plastics containing Flame Retardants, Resour. Conserv. Recycl, vol.84, pp.35-43, 2014.

N. Probst, C. Van-bellingen, and H. Van-den-bergh, Compounding with conductive carbon black, Plast. Addit. Compd, vol.11, issue.09, pp.70080-70087, 2009.

F. Puype, L. K. Ackerman, and J. Samsonek, Evaluation of Direct Analysis in Real Time -High Resolution Mass Spectrometry (DART-HRMS) for WEEE specific substance determination in polymeric samples, Chemosphere, vol.232, pp.481-488, 2019.

S. Roh, S. Oh, E. Park, and W. Z. Choi, Identification of black plastics realized with the aid of Raman spectroscopy and fuzzy radial basis function neural networks classifier, J. Mater. Cycles Waste Manag, vol.19, pp.1093-1105, 2017.

O. Rozenstein, E. Puckrin, and J. Adamowski, Development of a new approach based on midwave infrared spectroscopy for post-consumer black plastic waste sorting in the recycling industry, Waste Manag, vol.68, pp.38-44, 2017.

M. Schlummer, F. Brandl, A. Mäurer, and R. Van-eldik, Analysis of flame retardant additives in polymer fractions of waste of electric and electronic equipment (WEEE) by means of HPLC-UV/MS and GPC-HPLC-UV, J. Chromatogr. A, vol.1064, pp.39-51, 2005.

S. Serranti, A. Gargiulo, and G. Bonifazi, Classification of polyolefins from building and construction waste using NIR hyperspectral imaging system, Resour. Conserv. Recycl, vol.61, pp.52-58, 2012.

M. Sharkey, M. A. Abdallah, . .-e, D. S. Drage, S. Harrad et al., Portable Xray fluorescence for the detection of POP-BFRs in waste plastics, Sci. Total Environ, vol.639, pp.49-57, 2018.

C. Signoret, A. Caro-bretelle, J. Lopez-cuesta, P. Ienny, and D. Perrin, MIR spectral characterization of plastic to enable discrimination in an industrial recycling context: I. Specific case of styrenic polymers, Waste Manag, vol.95, pp.513-525, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02424757

C. Signoret, A. Caro-bretelle, J. Lopez-cuesta, P. Ienny, and D. Perrin, MIR spectral characterization of plastic to enable discrimination in an industrial recycling context: II. Specific case of polyolefins, Waste Manag, vol.98, pp.160-172, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02424758

C. Signoret, M. Edo, A. Caro-bretelle, J. Lopez-cuesta, P. Ienny et al., MIR spectral characterization of plastic to enable discrimination in an industrial recycling context: III. Anticipating impacts of ageing on identification, Waste Manag, vol.109, pp.51-64, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02573138

F. E. Spetale, P. Bulacio, S. Guillaume, J. Murillo, and E. Tapia, A spectral envelope approach towards effective SVM-RFE on infrared data, Pattern Recognit. Lett, vol.71, pp.59-65, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01728931

E. Stenvall, S. Tostar, A. Boldizar, M. R. Foreman, and K. Möller, An analysis of the composition and metal contamination of plastics from waste electrical and electronic equipment (WEEE), Waste Manag, vol.33, pp.915-922, 2013.

S. Z. Szilasi, R. Huszank, D. Szikra, T. Váczi, I. Rajta et al., Chemical changes in PMMA as a function of depth due to proton beam irradiation, Mater. Chem. Phys, vol.130, pp.702-707, 2011.

Y. Tachwali, Y. Al-assaf, and A. R. Al-ali, Automatic multistage classification system for plastic bottles recycling, Resour. Conserv. Recycl, vol.52, pp.266-285, 2007.

A. W. Turner, D. Wienke, W. Melssen, and L. M. Buydens, Plastic material identification with spectroscopic near infrared imaging and artificial neural networks, Anal. Chim. Acta, vol.117, pp.12-21, 1998.

F. Vilaplana, P. Karlsson, A. Ribes-greus, P. Ivarsson, and S. Karlsson, Analysis of brominated flame retardants in styrenic polymers, J. Chromatogr, vol.1196, issue.1197, pp.139-146, 2008.

F. Vilaplana, A. Ribes-greus, and S. Karlsson, Microwave-assisted extraction for qualitative and quantitative determination of brominated flame retardants in styrenic plastic fractions from waste electrical and electronic equipment (WEEE), Talanta, vol.78, pp.33-39, 2009.

C. Vrancken, P. J. Longhurst, and S. T. Wagland, Critical review of real-time methods for solid waste characterisation: informing material recovery and fuel production, Waste Manag, vol.61, pp.40-57, 2017.

P. A. Wäger and R. Hischier, Life cycle assessment of post-consumer plastics production from waste electrical and electronic equipment (WEEE) treatment residues in a Central European plastics recycling plant, Sci. Total Environ, vol.529, pp.158-167, 2015.

C. Wang, H. Wang, J. Fu, and Y. Liu, Flotation separation of waste plastics for recycling-A review, Waste Manag, vol.41, pp.28-38, 2015.

, LCA of management options for mixed waste plastics. Waste resource action programme (WRAP), WRAP, 2008.

Y. Yamaji, K. Okaya, G. Dodbiba, L. P. Wang, and T. Fujita, A novel separation method for plastic of discarded appliance including black plastic by using Raman spectroscopy, Resour. Process, vol.60, pp.65-71, 2013.

X. Yang, L. Sun, J. Xiang, S. Hu, and S. Su, Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): A review, Waste Manag, vol.33, pp.462-473, 2013.

P. Zhao, J. Xie, F. Gu, N. Sharmin, P. Hall et al., Separation of mixed waste plastics via magnetic levitation, Waste Manag, vol.76, pp.46-54, 2018.

Y. Zhao, X. Lv, and H. Ni, Solvent-based separation and recycling of waste plastics: a review, Chemosphere, vol.209, pp.707-720, 2018.

Z. Zhou, S. Wang, Y. Zhang, and Y. Zhang, Effect of different carbon fillers on the properties of PP composites: comparison of carbon black with multiwalled carbon nanotubes, J. Appl. Polym. Sci, vol.102, pp.4823-4830, 2006.