B. H. Robinson, E-waste: an assessment of global production and environmental impacts, Sci Total Environ, vol.408, pp.183-191, 2009.

, Earth Overshoot Day. In: Glob. Footpr. Netw, 2020.

A. K. Awasthi and J. Li, Management of electrical and electronic waste: A comparative evaluation of China and India, Renew Sustain Energy Rev, vol.76, pp.434-447, 2017.

S. Salhofer, B. Steuer, R. Ramusch, and P. Beigl, WEEE management in Europe and China-a comparison, Waste Manag, vol.57, pp.27-35, 2016.

Y. Kalmykova, J. Patrício, L. Rosado, and P. Berg, Out with the old, out with the new-the effect of transitions in TVs and monitors technology on consumption and WEEE generation in Sweden, Waste Manag, vol.46, pp.511-522, 1996.

M. D. Bovea, V. Ibáñez-forés, V. Pérez-belis, and P. Quemades-beltrán, Potential reuse of small household waste electrical and electronic equipment: methodology and case study, Waste Manag, vol.53, pp.204-217, 2016.

B. Lu, B. Li, and L. Wang, Reusability based on Life Cycle Sustainability Assessment: case study on WEEE. Procedia CIRP, vol.15, pp.473-478, 2014.

G. I. Zlamparet, W. Ijomah, and Y. Miao, Remanufacturing strategies: a solution for WEEE problem, J Clean Prod, vol.149, pp.126-136, 2017.

J. Quariguasi-frota-neto and J. Bloemhof, An analysis of the eco-efficiency of remanufactured personal computers and mobile phones, Prod Oper Manag, vol.21, pp.101-114, 2012.

,

Y. Javadi, M. S. Hosseini, and M. Aghjeh, The effect of carbon black and HALS hybrid systems on the UV stability of, 2014.

, Unnotched Charpy impact tests curves-ISO 179 1eA-accelerated and natural ageing-10 specimens/batch for HIPS, 5 for ABS high-density polyethylene (HDPE), Iran Polym J, vol.23, pp.793-799

M. Liu and A. Horrocks, Effect of Carbon Black on UV stability of LLDPE films under artificial weathering conditions, Polym Degrad Stab, vol.75, issue.01, p.252, 2002.

X. Jouan and J. L. Gardette, Photo-oxidation of ABS: Part 2-origin of the photodiscoloration on irradiation at long wavelengths, Polym Degrad Stab, vol.36, issue.92, pp.90054-90063, 1992.

S. Serranti, V. Luciani, and G. Bonifazi, An innovative recycling process to obtain pure polyethylene and polypropylene from household waste, Waste Manag, vol.35, pp.12-20, 2015.

J. Beigbeder, D. Perrin, J. Mascaro, and J. Lopez-cuesta, Study of the physico-chemical properties of recycled polymers from waste electrical and electronic equipment (WEEE) sorted by high resolution near infrared devices, Resour Conserv Recycl, vol.78, pp.105-114, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02536526

D. Perrin, O. Mantaux, and P. Ienny, Influence of impurities on the performances of HIPS recycled from Waste Electric and Electronic Equipment (WEEE), Waste Manag, vol.56, pp.438-445, 2016.

F. Vilaplana and S. Karlsson, Quality concepts for the improved use of recycled polymeric materials: a review, Macromol Mater Eng, vol.293, pp.274-297, 2008.

S. Brunner, P. Fomin, and C. Kargel, Automated sorting of polymer flakes: fluorescence labeling and development of a measurement system prototype, Waste Manag, vol.38, pp.49-60, 2015.

C. Wang, H. Wang, J. Fu, and Y. Liu, Flotation separation of waste plastics for recycling-a review, Waste Manag, vol.41, pp.28-38, 2015.

H. Langhals, D. Zgela, and T. Schlücker, High performance recycling of polymers by means of their fluorescence lifetimes, Green Sustain Chem, vol.04, pp.144-150, 2014.

S. Roh, S. Oh, E. Park, and W. Z. Choi, Identification of black plastics realized with the aid of Raman spectroscopy and fuzzy radial basis function neural networks classifier, J Mater Cycles Waste Manag, vol.19, pp.1093-1105, 2017.

J. Huang, C. Tian, J. Ren, and Z. Bian, Study on impact acoustic-visual sensor-based sorting of ELV plastic materials, Sensors, vol.17, p.1325, 2017.

V. C. Costa, F. Aquino, C. M. Paranhos, and E. R. Pereira-filho, Identification and classification of polymer e-waste using laserinduced breakdown spectroscopy (LIBS) and chemometric tools, Polym Test, vol.59, pp.390-395, 2017.

S. Barbier, S. Perrier, and P. Freyermuth, Plastic identification based on molecular and elemental information from laser induced breakdown spectra: a comparison of plasma conditions in view of efficient sorting, Spectrochim Acta Part B, vol.88, pp.167-173, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00905757

A. Küter, S. Reible, and T. Geibig, THz imaging for recycling of black plastics, vol.85, pp.191-201, 2018.

E. Maris, P. Botané, P. Wavrer, and D. Froelich, Characterizing plastics originating from WEEE: a case study in France, Miner Eng, vol.76, pp.28-37, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01206310

G. Martinho, A. Pires, L. Saraiva, and R. Ribeiro, Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling, Waste Manag, vol.32, pp.1213-1217, 2012.

J. R. Peeters, P. Vanegas, and K. Kellens, Forecasting waste compositions: a case study on plastic waste of electronic display housings, Waste Manag, vol.46, pp.28-39, 2015.

E. Stenvall, S. Tostar, and A. Boldizar, An analysis of the composition and metal contamination of plastics from waste electrical and electronic equipment (WEEE), Waste Manag, vol.33, pp.915-922, 2013.

Y. Han, R. Lach, and W. Grellmann, The Charpy impact fracture behaviour in ABS materials, Die Angew Makromol Chem, vol.270, pp.13-21, 1999.

D. Hirayama and C. Saron, Morphologic and mechanical properties of blends from recycled acrylonitrile-butadiene-styrene and high-impact polystyrene, Polymer (United Kingdom), vol.135, pp.271-278, 2018.

J. P. Mercier and E. Maréchal, Chimie des polymères: synthèses, réactions, dégradations, 1st edn, Presses Polytechniques et Universitaires Romandes, 1996.

J. Moore, Acrylonitrile-butadiene-styrene (ABS)-a review, Composites, vol.4, issue.73, pp.90585-90590, 1973.

L. A. Utracki, Commercial polymer blends, 1998.

C. Maestrini, K. Pisoni, and H. H. Kausch, On the elastic properties of rubber toughened Styrenics, J Mater Sci, vol.31, pp.3249-3257, 1996.

G. Wypych, ABS poly(acrylonitrile-co-butadiene-co-styrene). Handbook of Polymers, pp.5-11, 2016.

A. Alfarraj and E. Bruce-nauman, Super HIPS: improved high impact polystyrene with two sources of rubber particles, Polymer (Guildf), vol.45, pp.8435-8442, 2004.

J. Shimada and K. Kabuki, The mechanism of oxidative degradation of ABS resin. Part II. The mechanism of photooxidative degradation, J Appl Polym Sci, vol.12, pp.671-682, 1968.

F. Vilaplana, S. Karlsson, and A. Ribes-greus, NMR relaxation reveals modifications in rubber phase dynamics during long-term degradation of high-impact polystyrene (HIPS), 2011.

, Polymer (Guildf), vol.52, pp.1410-1416

S. Tolue, M. R. Moghbeli, and S. M. Ghafelebashi, Preparation of ASA (acrylonitrile-styrene-acrylate) structural latexes via seeded emulsion polymerization, Eur Polym J, vol.45, pp.714-720, 2009.

A. Davis and D. Gordon, Rapid assessment of weathering stability from exposure of polymer films. II. The effectiveness of different regions of the solar spectrum in degrading an ABS terpolymer, J Appl Polym Sci, vol.18, p.415, 1974.

X. Jouan and J. Gardette, Photooxidation of ABS at longwavelengths, J Polym Sci Part A, vol.29, pp.685-696, 1991.

J. Gardette, B. Mailhot, and J. Lemaire, Photooxidation mechanisms of styrenic polymers, Polym Degrad Stab, vol.48, pp.457-470, 1995.

D. Saviello, E. Pouyet, and L. Toniolo, Synchrotron-based FTIR microspectroscopy for the mapping of photo-oxidation and additives in acrylonitrile-butadiene-styrene model samples and historical objects, Anal Chim Acta, vol.843, pp.59-72, 2014.

B. Mailhot and J. Gardette, Mechanism of poly(styrene-coacrylonitrile) photooxidation, Polym Degrad Stab, vol.44, pp.90168-90174, 1994.

B. Tiganis, L. Burn, P. Davis, and A. Hill, Thermal degradation of acrylonitrile-butadiene-styrene (ABS) blends, Polym Degrad Stab, vol.76, issue.02, pp.45-54, 2002.

B. Wang, K. Zhao, and Y. Zhang, Influence of aging conditions on the mechanical properties and flame retardancy of HIPS composites, J Appl Polym Sci, vol.135, p.46339, 2018.

F. Vilaplana, A. Ribes-greus, and S. Karlsson, Degradation of recycled high-impact polystyrene. Simulation by reprocessing and thermo-oxidation, Polym Degrad Stab, vol.91, pp.2163-2170, 2006.

J. M. Pérez, J. L. Vilas, and J. M. Laza, Effect of reprocessing and accelerated weathering on ABS properties, J Polym Environ, vol.18, pp.71-78, 2010.

L. Mantia, F. Gardette, and J. , Improvement of the mechanical properties of photo-oxidized films after recycling, Polym Degrad Stab, vol.75, issue.01, pp.199-208, 2002.

L. Soccalingame, D. Perrin, and J. Bénézet, Reprocessing of artificial UV-weathered wood flour reinforced polypropylene composites, Polym Degrad Stab, vol.120, pp.313-327, 2015.

L. Soccalingame, D. Perrin, J. Bénézet, and A. Bergeret, Reprocessing of UV-weathered wood flour reinforced polypropylene composites: study of a natural outdoor exposure, Polym Degrad Stab, vol.133, pp.389-398, 2016.

R. Pfaendner, H. Herbst, K. Hoffmann, and F. Sitek, Recycling and restabilization of polymers for high quality applications: an overview, Die Angew Makromol Chem, vol.232, pp.193-227, 1995.

R. Pfaendner, H. Herbst, and K. Hoffmann, Innovative concept for the upgrading of recyclates by restabilization and repair molecules, Macromol Symp, vol.135, pp.97-111, 1998.

P. Kiliaris, C. D. Papaspyrides, and R. Pfaendner, Reactiveextrusion route for the closed-loop recycling of poly(ethylene terephthalate), J Appl Polym Sci, vol.104, pp.1671-1678, 2007.

C. Kartalis, C. Papaspyrides, and R. Pfaendner, Recycling of post-used PE packaging film using the restabilization technique, Polym Degrad Stab, vol.70, issue.00, pp.106-109, 2000.

C. J. Tsenoglou, C. N. Kartalis, C. D. Papaspyrides, and R. Pfaendner, Restabilization of recycled, CaCO 3 -filled polypropylene: assessment of reprocessing induced modifications and processing stabilizer effectiveness, Adv Polym Technol, vol.21, pp.260-267, 2002.

C. N. Kartalis, C. D. Papaspyrides, and R. Pfaendner, Mechanical recycling of post-used HDPE crates using the restabilization technique. II: Influence of artificial weathering, J Appl Polym Sci, vol.77, pp.1118-1127, 2000.

I. H. Craig and J. R. White, Mechanical properties of photodegraded recycled photo-degraded polyolefins, J Mater Sci, vol.41, pp.993-1006, 2006.

S. Luzuriaga, J. Ková?ová, and I. Fortelný, Degradation of preaged polymers exposed to simulated recycling: properties and thermal stability, Polym Degrad Stab, vol.91, pp.1226-1232, 2006.

A. Boldizar and K. Möller, Degradation of ABS during repeated processing and accelerated ageing, Polym Degrad Stab, vol.81, issue.03, pp.107-108, 2003.

E. Stenvall, Electronic waste plastics characterisation and recycling by melt-processing, 2013.

, The smallest temperature and humidity logger in the world ! In: Proges Plus, vol.14, 2019.

, QUV Accelerated Weathering Tester. In: Q-LAB, 2019.

J. E. Pickett, D. A. Gibson, and M. M. Gardner, Effects of irradiation conditions on the weathering of engineering thermoplastics, Polym Degrad Stab, vol.93, pp.1597-1606, 2008.

G. Wyszecki and W. S. Stiles, Color science: concepts and methods, quantitative data and formulae, 2000.

A. Alassali, S. Fiore, and K. Kuchta, Assessment of plastic waste materials degradation through near infrared spectroscopy, Waste Manag, vol.82, p.10, 2018.

R. M. Santos, G. L. Botelho, and A. V. Machado, Artificial and natural weathering of ABS, J Appl Polym Sci, vol.21, 2005.

R. M. Santos, G. L. Botelho, C. Cramez, and A. V. Machado, Outdoor and accelerated weathering of acrylonitrile-butadiene-styrene: a correlation study, Polym Degrad Stab, vol.98, pp.2111-2115, 2013.

R. Scaffaro and A. Maio, Influence of oxidation level of graphene oxide on the mechanical performance and photo-oxidation resistance of a polyamide 6, Polymers (Basel), vol.11, p.857, 2019.

H. Xingzhou and L. Zubo, Wavelength sensitivity of photooxidation of styrene-butadiene-styrene copolymer, Polym Degrad Stab, vol.48, p.11, 1995.

N. D. Searle, N. L. Maecker, and L. Crewdson, Wavelength sensitivity of acrylonitrile-butadiene-styrene, J Polym Sci Part A, vol.27, pp.1341-1357, 1989.

F. J. Arráez, M. L. Arnal, and A. J. Müller, Thermal degradation of high-impact polystyrene with pro-oxidant additives, Polym Bull, 2018.

V. Mylläri, T. Ruoko, and S. Syrjälä, A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation, J Appl Polym Sci, 2015.

M. Birchmeier, D. B. Priddy, and P. B. Smith, Thermal styreneco-acrylonitrile discoloration problem: the role of sequence distribution and oligomers, Macromolecules, vol.26, pp.6068-6075, 2005.

L. Audouin, V. Langlois, J. Verdu, and J. De-bruijn, Role of oxygen diffusion in polymer ageing: kinetic and mechanical aspects, J Mater Sci, vol.29, pp.569-583, 1994.

O. Kuvshinnikova, G. Boven, and J. E. Pickett, Weathering of aromatic engineering thermoplastics: comparison of outdoor and xenon arc exposures, Polym Degrad Stab, vol.160, p.11, 2018.

R. Hirschler, Whiteness, Yellowness, and Browning in Food Colorimetry, Color in food: technological and psychophysical aspects, pp.93-103, 2016.

T. Achtioui, C. Lacoste, L. Baillif, M. Erre, and D. , Prediction of the yellowing of styrene-stat-acrylonitrile and acrylonitrilebutadiene-styrene during processing in an internal mixer, J Polym Eng, vol.38, pp.983-993, 2018.

X. Bai, D. H. Isaac, and K. Smith, Reprocessing acrylonitrile-butadiene-styrene plastics: Structure-property relationships, Polym Eng Sci, vol.47, pp.120-130, 2007.

E. Karahaliou and P. A. Tarantili, Stability of ABS compounds subjected to repeated cycles of extrusion processing, Polym Eng Sci, vol.49, pp.2269-2275, 2009.

T. ?ahin, T. S?nmazçelik, and ?. ?ahin, The effect of natural weathering on the mechanical, morphological and thermal properties of high impact polystyrene (HIPS), Mater Des, vol.28, pp.2303-2309, 2007.

F. A. Bottino, A. R. Cinquegrani, D. Pasquale, and G. , Chemical modifications, mechanical properties and surface photo-oxidation of films of polystyrene (PS), Polym Test, vol.23, p.1, 2003.

L. B. Brennan, D. H. Isaac, and J. C. Arnold, Recycling of acrylonitrile-butadiene-styrene and high-impact polystyrene from waste computer equipment, J Appl Polym Sci, vol.86, pp.572-578, 2002.