J. Aguado and D. P. Serrano, European trends in the feedstock recycling of plastics wastes, Global Wastes NEST Journal, vol.9, pp.9-12, 2006.

A. Flores, R. Sanchez-valdes, and S. , Effect of reprocessing and moisture on the properties of bisphenol-A polycarbonate, Journal of Injection Molding Technology, vol.3, pp.21-27, 1999.

A. Lettieri, P. Baeyens, and J. , Recycling and recovery routes of plastic solid waste (PSW): a review, Waste Management, vol.29, issue.10, pp.2625-2668, 2009.

J. Anzano, B. Bonilla, B. Montull-ibor, and J. Casas-gonzález, Plastic identification and comparison by multivariate techniques with laser-induced breakdown spectroscopy, Journal of Applied Polymer Science, vol.121, pp.2170-2176, 2010.

J. C. Arnold, T. Watson, S. Alston, M. Carnie, and C. Glover, The use of FTIR mapping to assess phase distribution in mixed and recycled WEEE plastics, Polymer Testing, vol.29, pp.459-70, 2010.

X. Bai, D. H. Isaac, and K. Smith, Reprocessing acrylonitrile-butadiene-styrene plastics: structure-property relationships, Polymer Engineering and Science, vol.47, issue.2, pp.120-150, 2007.

M. L. Barthes, O. Mantaux, M. Pedros, E. Lacoste, and M. Dumon, Recycling of aged abs from real WEEE through ABS/PC blends in the abs-rich compositions, Advances in Polymer Technology, vol.2011, pp.1-11
URL : https://hal.archives-ouvertes.fr/hal-00817133

A. K. Bledzki and W. Nowaczek, Identification of plastics in waste materials and methods for their recycling, International Polymer Science and Technology, vol.21, pp.73-80, 1994.

S. Boeykens and C. Vázquez, Preliminary classification of polymers by using total-reflection X-ray fluorescence spectra, Spectrochimica Acta Part B, vol.59, issue.8, pp.1189-92, 2004.

L. B. Brennan, D. H. Isaac, and J. C. Arnold, Recycling of acrylonitrile-butadiene-styrene and high-impact polystyrene from waste computer equipment, Journal of Applied Polymer Science, vol.86, pp.572-580, 2002.

R. Buchan and B. Yarar, Recovery plastics for recycling by mineral processing techniques, JOM, vol.47, pp.52-57, 1995.

C. B. Bucknall, F. P. Frederic, F. Cote, and I. K. Partridge, Effects of rubber particle volume fraction on deformation and fracture in HIPS, Journal of Materials Science, vol.21, pp.301-307, 1986.

G. Dodbiba, J. Sadaki, K. Okaya, A. Shibayama, and T. Fujita, The use of air tabling and triboelectric separation for separating a mixture of three plastics, Minerals Engineering, vol.18, issue.15, pp.1350-60, 2005.

J. Ebert and M. Bahadir, Formation of PBDD/F from flame-retarded plastic materials under thermal stress, Environment International, vol.29, pp.711-717, 2003.

J. I. Eguiazabal and J. Nazabal, Reprocessing polycarbonate/acrylonitrile-butadienestyrene blends: influence on physical properties, Polymer Engineering and Science, vol.30, pp.527-558, 1990.

F. Elmaghor, L. Zhang, R. Fan, and H. Li, Recycling of polycarbonate by blending with maleic anhydride grafted ABS, Polymer, vol.45, pp.6719-6743, 2004.

, /95/EC of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment, Official Journal of the European Union, vol.37, pp.19-23, 2002.

, /96/EC of the European Parliament and of the Council of 27, Official Journal of the European Union, vol.37, pp.24-38, 2002.

G. Ferrara and T. P. Meloy, Low dense media process: a new process for low-density solid separation, Powder Technology, vol.103, pp.151-156, 1999.

G. Finnveden, J. Johansson, P. Lind, and A. Moberg, Life cycle assessment of energy from solid waste -part 1: general methodology and results, Journal of Cleaner Production, vol.13, issue.3, pp.213-242, 2005.

J. Florestan, A. Lachambre, N. Mermilliod, J. C. Boulou, and C. Marfisi, Recycling of plastics: automatic identification of polymers by spectroscopic methods. Resources, Conservation and Recycling, vol.10, pp.67-74, 1994.

N. Frees, Miljømaessige fordele og ulemper ved genvinding af plast [Environmental advantages and disadvantages the recycling of plastics examples based on specific products, Danish Environmental Protection Agency, 2002.

A. Garforth, A. Salmiaton, J. Hernandez-mart?nez, and A. Akah, Feedstock recycling of polymer wastes, Current Opinion in Solid State and Materials Science, vol.8, issue.6, pp.419-444, 2004.

Z. Horák, V. Fo?t, D. Hlavatá, F. Lednický, and F. Ve?erka, Compatibilization of high-impact polystyrene/polypropylene blends, Polymer, vol.37, issue.1, pp.65-73, 1996.

E. Hosoda, International aspects of recycling of electrical and electronic equipment: material circulation in the East Asian region, Journal of Material Cycles and Waste Management, vol.9, issue.2, pp.140-50, 2007.

W. Hui, C. Xiao-lei, Y. B. Chao, G. Zhang, and L. , Application of dissolved air flotation on separation of waste plastics ABS and PS, Waste Management, vol.32, issue.7, pp.1297-305, 2012.

J. Huisman, F. Magalini, R. Kuehr, C. Maurer, C. Delgado et al., United Nations University Study No. 07010401, Review of Directive 2002/96 on Waste Electrical and Electronic Equipment (WEEE) (Final Report), 2006.

. Huth-fehre-th, R. Feldhoff, K. Quick, L. Winter, F. Cammann et al., NIR-remote sensing and artificial neural networks for rapid identification of post-consumer plastics, Journal of Molecular Structure, vol.348, pp.143-149, 1995.

J. Inberg, Fracture of polycarbonate/ABS blends, 2001.

, Environmental Management. Life Cycle Assessment. Principles and Framework, ISO 14040, 2006.

W. Jenseit, H. Stahl, V. Wollny, E. K. Karahaliou, and P. A. Tarantili, Recovery options for plastic parts from end-of-life vehicles: an eco-efficiency assessment. Darmstadt: Öko-Institut eV, Polymer Engineering and Science, vol.49, issue.11, pp.2269-75, 2003.

T. V. Karstang and A. Henriksen, Infrared spectroscopy and multivariate calibration used in quantitative analysis of additives in high-density polyethylene, Chemometrics and Intelligent Laboratory Systems, vol.14, issue.1-3, pp.331-340, 1992.

S. Kaski, H. Häkkänen, and J. Korppi-tommola, Determination of Cl/C and Br/C ratios in pure organic solids using laser-induced plasma spectroscopy in near vacuum ultraviolet, Journal of Analytical Atomic Spectrometry, vol.19, pp.474-482, 2004.

D. Lazarevic, E. Aoustina, N. Buclet, and N. Brandt, Plastic waste management in the context of a European recycling society: comparing results and uncertainties in a life cycle perspective. Resources, Conservation and Recycling, vol.55, pp.246-59, 2010.
URL : https://hal.archives-ouvertes.fr/halshs-00584531

I. Luederwald, Mass spectroscopy of synthetic polymers, Pure and Applied Chemistry, vol.54, issue.2, pp.255-65, 1981.

S. Luzuriaga, J. Kovarova, and I. Fortelny, Degradation of pre-aged polymers exposed to simulated recycling: properties and thermal stability, Polymer Degradation and Stability, vol.91, pp.1226-1258, 2006.

B. Mailhot and J. Gardette, Fourier transform infrared and Fourier transform Raman analysis of styrenic polymers, Vibrational Spectroscopy, vol.1, pp.69-78, 1996.

N. M. Mehat and S. Kamaruddin, Optimization of mechanical properties of recycled plastic products via optimal processing parameters using the Taguchi method, Journal of Materials Processing Technology, vol.211, issue.12, pp.1989-94, 2011.

N. Menad, B. Blorkman, and E. G. Allain, Combustion of plastics contained in electric electronic scrap, Resources, Conservation and Recycling, vol.24, pp.65-85, 1998.

N. Menad, S. Guignot, and J. A. Van-houwelingen, New characterisation method of electrical and electronic equipment wastes (WEEE), Waste Management, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01017115

R. Mirza, A review of the role of plastics in energy recovery, Chemosphere, vol.38, issue.1, pp.207-238, 1999.

R. D. Pascoe, The use of selective depressants for the separation of ABS and HIPS by froth flotation, Minerals Engineering, vol.18, pp.233-240, 2005.

J. M. Pérez, J. L. Vilas, J. M. Laza, S. Arnáiz, F. Mijangos et al., Effect of reprocessing and accelerated ageing on thermal and mechanical polycarbonate properties, Journal of Materials Processing Technology, vol.210, issue.5, pp.727-760, 2010.

D. Perrin, C. Guillermain, A. Bergeret, J. M. Lopez-cuesta, and G. Tersac, SMC composites waste management as reinforcing fillers in polypropylene by combination of mechanical and chemical recycling processes, Journal of Materials Science, vol.41, pp.3593-602, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01250857

F. Perugini, M. L. Mastellone, and U. Arena, A life cycle assessment of mechanical and feedstock recycling options for management of plastic packaging wastes, Environmental Progress, vol.24, pp.137-54, 2005.

S. Pongstabodee, N. Kunachitpimol, and S. Damronglerd, Combination of three-stage sinkfloat method and selective flotation technique for separation of mixed postconsumer plastic waste, Waste Management, vol.28, pp.475-83, 2007.

J. Puckett, L. Byster, S. Westervelt, R. Gutierrez, S. Davis et al., Exporting Harm The High-Tech Trashing of Asia. Basel Action Network and Silicon Valley Toxics Coalition, 2003.

C. Remili, M. Kaci, A. Benhamida, S. Bruzaud, and Y. Grohens, The effects of reprocessing cycles on the structure and properties of polystyrene/Cloisite15A nanocomposites, Polymer Degradation and Stability, vol.96, pp.1489-96, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00988107

D. Salari and H. Ranjbar, Study on the recycling of ABS resins: simulation of reprocessing and thermo-oxidation, Iranian Polymer Journal, vol.17, issue.8, pp.599-610, 2008.

R. M. Santana and S. Manrich, Studies on morphology and mechanical properties of PP/HIPS blends from postconsumer plastic waste, Journal of Applied Polymer Science, vol.87, pp.747-51, 2002.

R. Scaffaro, L. Botta, D. Benedetto, and G. , Physical properties of virgin-recycled ABS blends: effect of post-consumer content and of reprocessing cycles, European Polymer Journal, vol.48, pp.637-685, 2012.

D. Scott and R. Waterland, Identification of plastic waste using spectroscopy and neural networks, Polymer Engineering and Science, vol.35, issue.12, pp.1011-1036, 1995.

, Where are WEee in Africa? Findings from the Basel Convention E-waste Africa Programme. Châtelaine, Switzerland: Secretariat of the Basel Convention, Secretariat of the Basel Convention (SBC), 2011.

S. Serranti, A. Gargiulo, and G. Bonifazi, Classification of polyolefins from building and construction waste using NIR hyperspectral imaging system. Resources, Conservation and Recycling, vol.61, pp.52-60, 2012.

H. Shen, R. Pugh, and E. Forssberg, Floatability, selectivity and flotation separation of plastics by using a surfactant, Colloids and Surfaces A, vol.196, pp.63-70, 2002.

J. Shibata, S. Matsumoto, H. Yamamoto, and E. Kusaka, Pradip flotation separation of plastics using selective depressants, International Journal of Mineral Processing, vol.48, pp.127-161, 1996.

P. Shonfield, LCA of management options for mixed waste plastic. London: WRAP Waste Resource Action Programme, 2008.

P. Solera, M. Nirsberger, and N. Castillo, Measuring stabilizers in pigmented plastics with near-infrared spectroscopy. Coloring Technology for Plastics, pp.197-207, 1999.

R. Taurino, P. Pozzi, and T. Zanasi, Facile characterization of polymer fractions from waste electrical and electronic equipment (WEEE) for mechanical recycling, Waste Management, vol.30, pp.2601-2608, 2010.

A. Ulrici, S. Serranti, C. Ferrari, D. Cesare, G. Foca et al., Efficient chemometrics strategies for PET-PLA discrimination in recycling plants using hyperspectral imaging, Chemometrics and Intelligent Laboratory Systems, vol.122, pp.31-40, 2013.

, Sustainable Innovation and Technology Transfer Industrial Sector Studies: Recycling -From E-waste to resources, 2009.

W. Van-den-broek, D. Wienke, W. J. Melssen, and L. Buydens, Plastic material identification with spectroscopic near infrared imaging and artificial neural networks, Analytica Chimica Acta, vol.361, pp.161-76, 1998.

J. Vehlow, B. Bergfeldt, H. Hunsinger, H. Seifert, and F. E. Mark, Bromine in waste incineration: partitioning and influence on metal volatilisation, Environmental Science and Pollution Research International, vol.10, issue.5, pp.329-363, 2003.

F. Vilaplana, S. Karlsson, A. Ribes-greus, C. Schade, and N. Nestle, NMR relaxation reveals modifications in rubber phase dynamics during long-term degradation of highimpact polystyrene (HIPS), Polymer, vol.52, pp.1410-1416, 2011.

F. Vilaplana and S. Karlsson, Quality concepts for the improved use of recycled polymeric materials: a review, Macromolecular Materials and Engineering, vol.293, pp.274-97, 2008.

F. Vilaplana, A. Ribes-greus, and S. Karlsson, Degradation of recycled high-impact polystyrene. Simulation by reprocessing and thermo-oxidation, Polymer Degradation and Stability, vol.91, pp.2163-70, 2006.

D. Wahab, A. Hussain, E. Scavino, M. Mustafa, and H. Basri, Development of a prototype automated sorting system for plastic recycling, American Journal of Applied Sciences, vol.3, issue.7, pp.1924-1932, 2006.

L. G. Weyer, Near-infrared spectroscopy of organic substances, Applied Spectroscopy Reviews, vol.21, issue.1, pp.1-43, 1985.

X. F. Xu, R. Wang, Z. Y. Tan, H. D. Yang, M. Y. Zhang et al., Effects of polybutadieneg-SAN impact modifiers on the morphology and mechanical behaviours of ABS blends, European Polymer Journal, vol.41, pp.1919-1945, 2005.