G. J. Albertsson, L. Teng, F. Engstrom, and S. Seetharaman, Effect of the heat treatment on the chromium partition in CaO-MgO-SiO 2 -Cr 2 O 3 synthetic slags, Metal. Mater. Trans. B, vol.44, pp.1586-1597, 2013.

G. J. Albertsson, F. Engstrom, and L. Teng, Effect of the heat treatment on the chromium partition in Cr-containing industrial and synthetic slags, Steel Res. Int, vol.85, issue.10, pp.1418-1431, 2014.

V. Arredondo-torres, A. Romero-serrano, B. Zeifert, J. Cruz-rivera, P. Flores-sanchez et al., Stabilization of MgCr 2 O 4 spinel in slag of the SiO 2 -CaO-MgO-Cr 2 O 3 system, Rev. Metal, vol.42, issue.6, pp.417-424, 2006.

R. Baciocchi, G. Costa, A. Polettini, and R. Pomi, Effects of thin-film accelerated carbonation on steel slag leaching, J. Hazard. Mater, vol.286, pp.369-378, 2015.

S. Barella, A. Gruttadauria, F. Magni, C. Mapelli, and D. Mombelli, Survey about safe and reliable use of EAF slag, ISIJ Int, vol.52, issue.12, pp.2295-2302, 2012.

E. Belhadj, C. Diliberto, and A. Lecomte, Characterization and activation of basic oxygen furnace slag, Cem. Concr. Compos, vol.34, pp.34-40, 2012.
URL : https://hal.archives-ouvertes.fr/hal-02445839

J. Bensted, Calcium aluminates cements, Structure and Performance of Cements, 2002.

H. Cabrera-real, A. Romero-serrano, B. Zeifert, A. Hernandez-ramirez, M. Hallen-lopez et al., Effect of MgO and CaO/SiO 2 on the immobilization of chromium in synthetic slags, J. Mater. Cycles Waste Manag, vol.14, pp.317-324, 2012.

P. Chaurand, J. Rose, V. Briois, L. Olivi, J. Hazemann et al., Environmental impacts of steel slag reused in road construction: a crystallographic and molecular (XANES) approach, J. Hazard. Mater, vol.139, pp.537-542, 2007.
URL : https://hal.archives-ouvertes.fr/ineris-00963049

G. Costa, A. Polettini, R. Pomi, and A. Stramazzo, Leaching modelling of slurry-phase carbonated steel slag, J. Hazard. Mater, 2015.

&. C. Danieli and S. P. Officine-meccaniche, Apparatus and Method for Processing Metallurgic Slag, 2014.

L. De-windt, P. Chaurand, and J. Rose, Kinetics of steel slag leaching: batch tests and modeling, Waste Manag, vol.31, pp.225-235, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00545194

P. M. De-wolff and J. W. Visser, Absolute Intensities-Outline of a Recommended Procedure, pp.202-204, 1988.

D. Durink, High Temperature Processing of Metallurgical Slags: A Method to Promote Recycling. Department of Materials Engineering, 2008.

C. J. Engelsen, H. A. Van-der-sloot, G. Wibetoe, H. Justnes, W. Lund et al., Leaching characterisation and geochemical modelling of minor and trace elements released from recycled concrete aggregates, Cem. Concr. Res, vol.40, pp.1639-1649, 2010.

C. J. Engelsen, G. Wibetoe, H. A. Van-der-sloot, W. Lund, and G. Petkovic, Field site leaching from recycled concrete aggregates applied as sub-base material in road construction, Sci. Total Environ, pp.86-97, 2012.

F. Engström, D. Adolfsson, C. Samuelsson, A. Sandstrom, and B. Björkman, A study of the solubility of pure slag minerals, Miner. Eng, vol.41, pp.46-52, 2013.

F. Engström, M. L. Larsson, C. Samuelsson, A. Sandström, R. Robinson et al., Leaching behavior of aged steel slags, Steel Res. Int, vol.85, issue.4, pp.607-615, 2014.

A. M. Faellman, Leaching of chromium and barium from steel slag in laboratory and field tests -a solubility controlled process?, Waste Manag, vol.20, pp.149-154, 2000.

A. M. Faellman and J. Hartlén, Utilisation of electric arc furnace slag in road construction, Environmental Geotechnics, pp.703-708, 1996.

F. Siderurgica and S. P. , Method and Plant for Treating Metallurgical Slag, 2012.

E. M. Gartner, J. F. Young, D. Damidot, and I. Jawed, Hydration of portland cement, Structure and Performance of Cements. E&FN Spon, pp.57-114, 2002.

J. Geiseler, Use of steelworks slag in Europe, Waste Manag, vol.16, issue.1, pp.59-63, 1996.

M. Gelfi, G. Cornacchia, and R. Roberti, Investigations on leaching behavior of EAF steel slags, 6th European Slag Conference, 2010.

P. C. Hewlett, Lea's Chemistry of Cement and Concrete, p.160, 1998.

W. J. Huijgen, G. Witkamp, and R. N. Comans, Mechanisms of aqueous wollastonite carbonation as a possible CO 2 sequestration process, Chem. Eng. Sci, vol.61, pp.4242-4251, 2006.

L. M. Juckes, The volume stability of modern steelmaking slags, Miner. Process. Extr. Metall, vol.112, issue.3, pp.177-197, 2003.

W. A. Klemm and J. Skalny, Selective Dissolution of Clinker Minerals and Its Applications, p.26, 1977.

M. Kühn, D. Mudersbach, J. M. Baena-liberato, V. De-angelis, D. Capodilupo et al., Chrome Immobilization in EAF Slag from High Alloy Steelmaking -Development of a Slag Treatment Process, 2006.

F. M. Lea, High-Alumina Cement, the Chemistry of Cement and Concrete, pp.490-527, 1970.

Y. Lee and C. L. Nassaralla, Formation of hexavalent chromium by reaction between slag and magnesite-chrome refractory, Metall. Mater. Trans. B, vol.29, pp.405-410, 1998.

C. Liao, Y. Tang, C. Liu, K. Shih, and F. Li, Double-barrier mechanism for chromium immobilization: a quantitative study of crystallization and leachability, J. Hazard. Mater, vol.311, pp.246-253, 2016.

B. B. Lind, A. M. Faellman, and L. B. Larsson, Environmental impact of ferrochrome slag in road construction, Waste Manag, vol.21, pp.255-264, 2001.

M. P. Luxan, R. Sotolongo, F. Dorrego, and E. Herrero, Characteristics of the slags produced in the fusion of scrap steel by electric arc furnace, Cem. Concr. Res, vol.30, issue.4, pp.517-519, 2000.

J. M. Manso, M. Losanez, J. A. Polanco, and J. J. Gonzalez, Ladle furnace slag in construction, J. Mater. Civ. Eng, vol.17, issue.5, pp.513-518, 2005.

J. N. Meegoda, W. Kamolpornwijit, Z. Hu, R. Mueller, and R. Patraj, Conversion of chromium ore processing residue to chrome steel, Proceedings of Geocongress 2008: Geotechnics of Waste Management and Remediation, pp.383-390, 2008.

S. Mizutani, N. Watanabe, S. Sakai, and H. Takatsuki, Influence of particle size preparation of MSW incineration residues on heavy metal leaching behavior in leaching tests, Environ. Sci, vol.13, issue.6, pp.363-370, 2006.

D. Mombelli, C. Mapelli, S. Barella, C. Di-cecca, G. Le-saout et al., The effect of chemical composition on the leaching behaviour of electric arc furnace (EAF) carbon steel slag during a standard leaching test, J. Environ. Chem. Eng, vol.4, pp.1050-1060, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02497786

D. Mombelli, C. Mapelli, S. Barella, A. Gruttadauria, G. Le-saout et al., The efficiency of quartz addition on electric arc furnace (EAF) carbon steel slag stability, J. Hazard. Mater, vol.279, pp.586-596, 2014.

D. Mombelli, C. Mapelli, A. Gruttadauria, C. Baldizzone, F. Magni et al., Analisys of electric arc furnace slag, Steel Res. Int, vol.83, issue.11, pp.1012-1019, 2012.

H. Moser and J. Römbke, Ecotoxicological Characterization of Waste: Results and Experiences of an International Ring, 2009.

D. Mudersbach, M. Kühn, J. Geiseler, and K. Koch, Chrome immobilisation in EAF-slags from high-alloy steelmaking: tests at FEhS-Institute and Development of an Operational Slag Treatment Process, Proceedings of the 1st Interntational Slag Valorisation Symposium, pp.101-110, 2009.

M. Nicolae, I. Vilciu, and F. Zaman, X-ray diffraction analysis of steel slag and blast furnace slag viewing their use for road construction, UPB Sci. Bull. Ser. B, vol.69, issue.2, pp.99-108, 2007.

L. Nicoleau, A. Nonat, and D. Perrey, The di-and tri-calcium silicate dissolutions, Cem. Concr. Res, vol.47, pp.14-30, 2013.

G. R. Qian, D. D. Sun, J. H. Tay, Z. Lai, and G. Xu, Autoclave properties of kirschsteinite-based steel slag, Cem. Concr. Res, vol.32, issue.9, pp.1377-1382, 2002.

G. R. Qian, D. D. Sun, J. H. Tay, and Z. Lai, Hydrothermal reaction and autoclave stability of Mg bearing RO phase in steel slag, Br. Ceram. Trans, vol.101, issue.4, pp.159-164, 2002.

B. Raab, S. Stöber, and H. Pöllmann, Investigations of the hydration behaviour of pure cement phases by different synthesis methods, Proceedings of the Centenary Conference, pp.79-92, 2008.

A. S. Reddy, R. K. Pradhan, and S. Chandra, Utilization of basic oxygen furnace (BOF) slag in the production of a hydraulic cement binder, Int. J. Miner. Process, vol.79, issue.2, pp.98-105, 2006.

E. Ruiz-agudo, C. V. Putnis, C. Rodriguez-navarro, and A. Putnis, Mechanism of leached layer formation during chemical weathering of silicate minerals, Geology, vol.40, issue.10, pp.947-950, 2012.

C. Schwandt and D. J. Fray, The electrochemical reduction of chromium sesquioxide in molten calcium chloride under cathodic potential control, Proceeding of Conference on Molten Salts and Ionic Liquids (EUCHEM), pp.655-670, 2006.

, Selected Solubility Products and Formation Constants, 1997.

H. Shen, E. Forssberg, and U. Nordstrom, Physicochemical and mineralogical properties of stainless steel slags oriented to metal recovery, Resour. Conserv. Recycl, vol.40, issue.3, pp.245-271, 2004.

C. Shi, Steel slag -its production, processing, characteristics, and cementitious properties, J. Mater. Civ. Eng, vol.16, issue.3, pp.230-236, 2004.

I. Strandkvist, B. Björkman, and F. Engström, Synthesis and dissolution of slag minerals -a study of ?-dicalcium silicate, pseudowollastonite and monticellite, Can. Metall. Q, vol.54, issue.4, pp.446-454, 2015.

H. F. Taylor, M. Tossavainen, F. Engstrom, Q. Yang, N. Menad et al., Characteristics of steel slag under different cooling conditions, Waste Manag, vol.27, pp.1335-1344, 1990.

P. E. Tsakiridis, G. D. Papadimitriou, S. Tsivilis, and C. Koroneos, Utilization of steel slag for Portland cement clinker production, J. Hazard. Mater, vol.152, issue.2, pp.805-811, 2008.

, Effect of pH on Heavy Metal Concentration, Process Potential Study. U-Mate International Inc, 2012.

A. Van-zomeren, S. R. Van-der-laan, H. B. Kobesen, W. J. Huijgen, and R. N. Comans, Changes in mineralogical and leaching properties of converter steel slag resulting from accelerated carbonation at low CO 2 pressure, Waste Manag, vol.31, pp.2236-2244, 2011.

M. Vítková, V. Ettler, M. Mihaljevic, and O. Sebek, Effect of sample preparation on contaminant leaching from copper smelting slag, J. Hazard. Mater, vol.197, pp.417-423, 2011.

F. Wachsmuth, J. Geiseler, W. Fix, K. Koch, and K. Schwerdtfeger, Contribution to the structure of BOF-slags and its influence on their volume stability, Can. Metall. Q, vol.20, issue.3, pp.279-284, 1981.

J. Ylipekkala, Quality Management of Chromium Containing Steel Slags from Melt Phase to Cooling. Department of Chemical Engineering and Geosciences, Division of Process Metallurgy, 2005.