P. P?-otschke and D. R. Paul, Formation of Co-continuous structures in melt-mixed immiscible polymer blends, J. Macromol. Sci. Polym. Rev, vol.43, pp.87-141, 2003.

E. Cohen, L. Zonder, A. Ophir, S. Kenig, S. Mccarthy et al., Hierarchical structures composed of confined carbon nanotubes in cocontinuous ternary polymer blends, Macromolecules, vol.46, pp.1851-1859, 2013.

Y. Li and H. Shimizu, Conductive PVDF/PA6/CNTs nanocomposites fabricated by dual formation of cocontinuous and nanodispersion structures, Macromolecules, vol.41, pp.5339-5344, 2008.

P. Salehi, P. Sarazin, and B. D. Favis, Porous devices derived from Co-continuous polymer blends as a route for controlled drug release, Biomacromolecules, vol.9, pp.1131-1138, 2008.

A. Esquirol, P. Sarazin, and N. Virgilio, Tunable porous hydrogels from cocontinuous polymer blends, vol.47, pp.3068-3075, 2014.

T. S. Omonov, C. Harrats, P. Moldenaers, and G. Groeninckx, Phase continuity detection and phase inversion phenomena in immiscible polypropylene/polystyrene blends with different viscosity ratios, Polymer (Guildf), vol.48, pp.5917-5927, 2007.

A. S. Caro-bretelle, T. Parpaite, B. Otazaghine, A. Taguet, and J. M. Lopez-cuesta, Viscoelastic properties of polystyrene/polyamide-6 blend compatibilized with silica/polystyrene Janus hybrid nanoparticles, J. Rheol, pp.305-310, 2017.

R. Tol, G. Groeninckx, I. Vinckier, P. Moldenaers, and J. Mewis, Phase morphology and stability of co-continuous (PPE/PS)/PA6 and PS/PA6 blends: effect of rheology and reactive compatibilization, Polymer (Guildf), vol.45, pp.2587-2601, 2004.

R. C. Willemse, A. Posthuma-de-boer, J. Van-dam, and A. D. Gotsis, Co-continuous morphologies in polymer blends: a new model, vol.39, pp.5879-5887, 1998.

P. A. Bhadane, M. F. Champagne, M. A. Huneault, F. Tofan, and B. D. Favis, Continuity development in polymer blends of very low interfacial tension, Polymer (Guildf), vol.47, pp.2760-2771, 2006.

P. V. Van-puyvelde and P. Moldenaers, Rheology and morphology development in immiscible polymer blends, Rheol. Rev, pp.101-145, 2005.

R. C. Willemse, Co-continuous morphologies in polymer blends: stability, vol.40, pp.430-433, 1999.

T. Y. Guo, M. D. Song, G. J. Hao, and B. H. Zhang, Compatibility and mechanical properties of polyamide-6/polystyrene/diblock poly(styrene-b-ethylene oxide) copolymer blends, Eur. Polym. J, vol.37, issue.00, p.118, 2001.

C. Zhang, C. Li, L. Wang, L. Feng, and T. Lin, Dual effects of compatibilizer on the formation of oriented ribbon-like dispersed phase domains in polystyrene/ polyamide 6 blends, Chem. Eng. Sci, vol.178, pp.146-156, 2018.

C. Lu, S. Guo, L. Wen, and J. Wang, Weld line morphology and strength of polystyrene/ polyamide-6/poly(styrene-co-maleic anhydride) blends, Eur. Polym. J, vol.40, pp.2565-2572, 2004.

A. Pei, A. Liu, T. Xie, and G. Yang, Effect of in situ synthesized macroactivator on morphology of PA6/PS blends via successive polymerization, J. Appl. Polym. Sci, vol.105, pp.1757-1765, 2007.

C. Zhang, L. Feng, X. Gu, S. Hoppe, and G. Hu, Efficiency of graft copolymers as compatibilizers for immiscible polymer blends, Polymer (Guildf), vol.48, pp.5940-5949, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00270685

R. T. Tol, V. B. Mathot, and G. Groeninckx, Confined crystallization phenomena in immiscible polymer blends with dispersed micro-and nanometer sized PA6 droplets, part 2: reactively compatibilized PS/PA6 and (PPE/PS)/PA6 blends, Polymer (Guildf), vol.46, pp.383-396, 2005.

F. Tseng, C. Tseng, F. Chang, J. Lin, and I. Cheng, Compatibilization of PS and PA6 blends by means of poly(oxyalkylene)amine modified styrene-maleic anhydride copolymer, J. Polym. Res, vol.12, pp.439-447, 2005.

J. Choi, H. Kim, D. Han, J. Lim, D. Oh et al., Effect of processing conditions on compatibility of nylon 6/polystyrene blend, J. Appl. Polym. Sci, vol.101, pp.1-7, 2006.

C. Yu, D. Shi, J. Wang, H. Shi, T. Jiang et al., Effect of a dual compatibilizer on the formation of co-continuous morphology of immiscible po'lymer blends, Mater. Des, vol.107, pp.171-177, 2016.

J. Yang, L. Sun, S. Xiang, J. He, L. Gu et al., Influence of organoclay and preparation technique on the morphology of Polyamide6/polystyrene/organoclay nanocomposites, J. Appl. Polym. Sci, vol.110, pp.276-282, 2008.

M. Kong, Y. Huang, Y. Lv, S. Wang, Q. Yang et al., Flow-induced morphological instability in nanosilica-filled polyamide 6/polystyrene blends, Polymer (Guildf), vol.55, pp.4348-4357, 2014.

T. Parpaite, B. Otazaghine, A. Taguet, R. Sonnier, A. S. Caro-bretelle et al., Incorporation of modified St? ober silica nanoparticles in polystyrene/ polyamide-6 blends: coalescence inhibition and modification of the thermal degradation via controlled dispersion at the interface, Polymer (Guildf), vol.55, pp.2704-2715, 2014.

M. Kong, Y. Huang, Y. Lv, Q. Yang, and G. Li, Formation and stability of string phase in polyamide 6/polystyrene blends in confined flow: effects of nanoparticles and blend ratio, AIChE J, vol.62, pp.564-573, 2016.

X. Zhang, M. Sun, and W. Chen, Synergistic effects of silica nanoparticles and reactive compatibilizer on the compatibilization of polystyrene/polyamide 6 blends, Polym. Eng. Sci, vol.57, pp.1301-1310, 2017.

X. Cai, B. Li, Y. Pan, and G. Wu, Morphology evolution of immiscible polymer blends as directed by nanoparticle self-agglomeration, Polymer (Guildf), vol.53, pp.259-266, 2012.

A. H. Hoseini, M. Arjmand, U. Sundararaj, and M. Trifkovic, Tunable electrical conductivity of polystyrene/polyamide-6/carbon nanotube blend nanocomposites via control of morphology and nanofiller localization, Eur. Polym. J, vol.95, pp.418-429, 2017.

E. Jalali-dil and B. D. Favis, Localization of micro and nano-silica particles in a high interfacial tension poly(lactic acid)/low density polyethylene system, Polymer (Guildf), vol.77, pp.156-166, 2015.

E. Jalali-dil, M. Arjmand, Y. Li, U. Sundararaj, and B. D. Favis, Assembling copper nanowires at the interface and in discrete phases in PLA-based polymer blends, Eur. Polym. J, vol.85, pp.187-197, 2016.

T. Parpaite, B. Otazaghine, A. S. Caro-bretelle, A. Taguet, R. Sonnier et al., Janus hybrid silica/polymer nanoparticles as effective compatibilizing agents for polystyrene/polyamide-6 melted blends, Polymer (Guildf), vol.90, pp.34-44, 2016.

S. Weiss, D. Hirsemann, B. Biersack, M. Ziadeh, A. H. Müller et al., Hybrid Janus particles based on polymer-modified kaolinite, vol.54, pp.1388-1396, 2013.

X. Yan, A. Cayla, E. Devaux, B. Otazaghine, and F. Salaün, Polypropylene/Poly(vinyl alcohol) blends compatibilized with kaolinite Janus hybrid particles and their transformation into fibers, Ind. Eng. Chem. Res, vol.58, pp.10931-10940, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02416643

M. Batistella, B. Otazaghine, R. Sonnier, A. Caro-bretelle, C. Petter et al., Fire retardancy of ethylene vinyl acetate/ultrafine kaolinite composites, Polym. Degrad. Stabil, vol.100, pp.54-62, 2014.

M. Sahnoune, A. Taguet, B. Otazaghine, M. Kaci, and J. Lopez-cuesta, Inner surface modification of halloysite nanotubes and its influence on morphology and thermal properties of polystyrene/polyamide-11 blends, Polym. Int, vol.66, pp.300-312, 2017.

M. Sahnoune, A. Taguet, B. Otazaghine, M. Kaci, and J. Lopez-cuesta, Effects of functionalized halloysite on morphology and properties of polyamide-11/SEBSg-MA blends, Eur. Polym. J, vol.11, pp.1-27, 2017.

Y. Lvov and E. Abdullayev, Functional polymer-clay nanotube composites with sustained release of chemical agents, Prog. Polym. Sci, vol.38, pp.1690-1719, 2013.

J. A. Galloway and C. W. Macosko, Comparison of methods for the detection of cocontinuity in poly(ethylene oxide)/polystyrene blends, Polym. Eng. Sci, vol.44, pp.714-727, 2004.

J. Plattier, L. Benyahia, M. Dorget, F. Niepceron, and J. Tassin, Viscosity-induced filler localisation in immiscible polymer blends, vol.59, pp.260-269, 2015.

E. Chibowski, Determination of surface free energy of kaolinite, Clay Clay Miner, vol.36, pp.455-461, 1988.

A. , G. Kasaliwal, and P. Otschke, Selective localization and migration of multiwalled carbon nanotubes in blends of polycarbonate and poly(styreneacrylonitrile), Macromol. Rapid Commun, vol.30, pp.423-429, 2009.

A. , A. Marmur, G. R. Kasaliwal, P. P?-otschke, and G. Heinrich, Shape-dependent localization of carbon nanotubes and carbon black in an immiscible polymer blend during melt mixing, Macromolecules, vol.44, pp.6094-6102, 2011.

R. Krishnamoorti, R. A. Vaia, and E. P. Giannelis, Structure and dynamics of polymerlayered silicate nanocomposites, Chem. Mater, vol.4756, pp.1728-1734, 1996.

L. Elias, F. Fenouillot, J. C. Majeste, and P. Cassagnau, Morphology and rheology of immiscible polymer blends filled with silica nanoparticles, vol.48, pp.6029-6040, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00372813

X. Liu, Q. Wang, R. Bao, W. Yang, B. Xie et al., Suppressing phase retraction and coalescence of co-continuous polymer blends: effect of nanoparticles References and particle network, vol.4, pp.49429-49441, 2014.

M. Sumita, K. Sakata, S. Asai, K. Miyasaka, and H. Nakagawa, Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black, Polym. Bull, vol.25, pp.265-271, 1991.

F. Gubbels, S. Blacher, E. Vanlathem, R. Erôme, R. Deltour et al., Design of electrical conductive composites: key role of the morphology on the electrical properties of carbon black filled polymer blends, Macromolecules, vol.28, pp.1559-1566, 1995.

F. Gubbels, R. Jerome, E. Vanlathem, R. Deltour, S. Blacher et al., Kinetic and thermodynamic control of the selective localization of carbon black at the interface of immiscible polymer blends, Chem. Mater, vol.10, pp.1227-1235, 1998.

M. Trifkovic, A. T. Hedegaard, M. Sheikhzadeh, S. Huang, and C. W. Macosko, Stabilization of PE/PEO cocontinuous blends by interfacial nanoclays, vol.48, pp.4631-4644, 2015.

H. Xiu, Y. Zhou, C. Huang, H. Bai, Q. Zhang et al., Deep insight into the key role of carbon black self-networking in the formation of co-continuous-like morphology in polylactide/poly(ether)urethane blends, Polymer (Guildf), vol.82, pp.11-21, 2016.

A. L. Persson and H. Bertilsson, Viscosity difference as distributing factor in selective absorption of aluminium borate whiskers in immiscible polymer blends, Polymer (Guildf), vol.39, pp.5633-5642, 1998.

A. Taghizadeh and B. D. Favis, Carbon nanotubes in blends of polycaprolactone/ thermoplastic starch, Carbohydr. Polym, vol.98, pp.189-198, 2013.

M. Huang, Z. Li, and H. Guo, The effect of Janus nanospheres on the phase separation of immiscible polymer blends via dissipative particle dynamics simulations, Soft Matter, vol.8, 2012.

A. Walther, K. Matussek, and A. H. Müller, Engineering nanostructured polymer blends with controlled nanoparticle location using Janus particles, ACS Nano, vol.2, pp.1167-1178, 2008.

H. Wang, X. Yang, Z. Fu, X. Zhao, Y. Li et al., Rheology of nanosilica-compatibilized immiscible polymer blends: formation of a "heterogeneous network" facilitated by interfacially anchored hybrid nanosilica, Macromolecules, vol.50, pp.9494-9506, 2017.

S. S. Ray and R. Salehiyan, Nanostructured Immiscible Polymer Blends, pp.107-142, 2020.

N. O. Jaensson, C. Mitrias, M. A. Hulsen, and P. D. Anderson, Shear-induced migration of rigid particles near an interface between a Newtonian and a viscoelastic fluid, Langmuir, vol.34, pp.1795-1806, 2018.