Controlled catalytic and thermal sequential pyrolysis and hydrolysis of phenolic resin containing waste streams to sequentially recover momers and chemicals, 1992. ,
Recycling technologies for thermoset composite materials-current status, Compos. Part A Appl. Sci. Manuf, vol.37, issue.8, pp.1206-1215, 2006. ,
Recycling of cured phenolic resin and a product such as a vacuum thermal insulator obtained thereby, 1999. ,
Recycling of composite materials, Chem. Eng. Process. Process Intensif, vol.51, pp.53-68, 2012. ,
Decomposition of Prepolymers and Molding Materials of Phenol Resin in Subcritical and Supercritical Water under an Ar Atmosphere, Ind. Eng. Chem. ?, vol.38, issue.4, pp.1391-1395, 1999. ,
Reaction of Model Compounds of Phenol Resin and Molding Materials of Phenol Resin in Supercritical Water for Chemical Recycling of Polymer Waste, Chem. Lett, vol.27, issue.9, pp.937-938, 1998. ,
The effects of solvents on the chemical decomposition of foamed phenol resin in high-temperature conditions, J. Mater. Cycles Waste Manag, vol.17, pp.453-458, 2015. ,
Effect of Solvents on the Liquid-Phase Cracking of Thermosetting Resins, Energy Fuels, vol.12, issue.2, pp.364-368, 1999. ,
Effect of polystyrene addition on the monomer recycling of phenol novolac, Polym. Degrad. Stab, vol.78, issue.2, pp.315-322, 2002. ,
Hydrogenolytic degradation of thermosets, Polym. Degrad. Stab, vol.74, issue.1, pp.25-32, 2001. ,
Chemical recycle of thermosetting resin in supercritical water ,
Chemical recycling of phenol resin by supercritical methanol, Ind. Eng. Chem. ?, vol.39, issue.2, pp.245-249, 2000. ,
Comminuted thermoset recyclate as a reinforcing Part I Characterisation of recyclate feedstocks, vol.6, pp.2965-2975, 2001. ,
Comminuted thermoset recyclate as a reinforcing filler for thermoplastics -Part II : Structure-property effects in polypropylene compositions, J. Mater. Sci, vol.36, pp.2977-2990, 2001. ,
Structure development in thermoset recyclate-filled polypropylene composites, Polym. Compos, vol.21, issue.3, pp.417-435, 2000. ,
Use of Industrial Waste Based on Phenolic Resin as Filler for Polypropylene, Polimeros, vol.22, issue.3, pp.245-252, 2012. ,
Recycling of thermosets as fillers, pp.640-642, 1984. ,
Phenolic prepreg waste as functional filler with antioxidant effect in polypropylene and polyamide-6, Polym. Degrad. Stab, vol.91, issue.8, pp.1815-1823, 2006. ,
Dynamically Cured Polypropylene / Novolac Blends Compatibilized with Maleic Anhydride-g -Polypropylene, 2007. ,
, Eur. Polym. J, vol.30, issue.5, pp.573-580, 1994.
A review of particulate reinforcement theories for polymer composites, J. Mater. Sci, vol.25, pp.4933-4942, 1990. ,
Mechanical properties of particulate filled polymers, Polym. Compos, vol.8, issue.2, pp.115-122, 1987. ,
Amélioration des thermoplastiques -Rôle du compoundeur, 2003. ,
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites, Compos. Part B Eng, vol.39, issue.6, pp.933-961, 2008. ,
Prediction of tensile yield strength of rigid inorganic particulate filled thermoplastic composites, J. Mater. Process. Technol, vol.83, issue.1-3, pp.127-130, 1998. ,
Toughening and reinforcing in rigid inorganic particulate filled poly(propylene): A review, J. Appl. Polym. Sci, vol.83, pp.1547-1555, 2002. ,
Polymer micro and nanocomposites: Structure, interactions, properties, J. Ind. Eng. Chem, vol.14, issue.5, pp.535-563, 2008. ,
Phénoplastes ou phénols-formols, 1991. ,
Introduction to physical polymer Science, 2006. ,
Mechanical properties of talc-and CaCO 3 -reinforced high-crystallinity polypropylene composites, J. Mater. Sci, vol.41, issue.8, pp.2291-2300, 2006. ,
Nucleation and crystallization of polypropylene by mineral fillers: relationship to impact strength, Polymer (Guildf), vol.33, issue.24, pp.5215-5224, 1992. ,
Surface characteristics of phenolformaldehyde-lignin resin determined by contact angle measurement and inverse gas chromatography, Ind. Crops Prod, vol.23, issue.2, pp.115-121, 2006. ,
The packing density of `perfect' binary mixtures, Powder Technol, vol.103, issue.2, pp.145-150, 1999. ,