A. Aldrian, A. Ledersteger, and R. Pomberger, Monitoring of WEEE plastics in regards to brominated flame retardants using handheld XRF. Waste Manage, vol.36, pp.297-304, 2015.

N. D. Allizé-plasturgie, Allizé-Plasturgie : a professional organisation at the service of plastics and composites|Allizé-Plasturgie

V. Archodoulaki, S. Lüftl, T. Koch, and S. Seidler, Property changes in polyoxymethylene (POM) resulting from processing, ageing and recycling, Polym. Degrad. Stab, vol.92, pp.2181-2189, 2007.

A. Aronson, K. Tartakovsky, R. Falkovich, M. Rabaev, M. Gottlieb et al., Failure analysis of aging in polyoxymethylene fuel valves using fractography and thermal-FTIR analysis, Eng. Fail. Anal, vol.79, pp.988-998, 2017.

S. Asadi, H. Babaizadeh, N. Foster, and R. Broun, Environmental and economic life cycle assessment of PEX and copper plumbing systems: a case study, J. Clean. Prod, vol.137, pp.1228-1236, 2016.

B. K. Baek, Y. H. La, A. S. Lee, H. Han, S. H. Kim et al., Decrosslinking reaction kinetics of silane-crosslinked polyethylene in sub-and supercritical fluids, Polym. Degrad. Stab, vol.130, pp.103-108, 2016.

W. Becker, K. Sachsenheimer, and M. Klemenz, Detection of black plastics in the middle infrared spectrum (MIR) using photon up-conversion technique for polymer recycling purposes, Polymers (Basel), vol.9, p.435, 2017.

J. Beigbeder, D. Perrin, J. Mascaro, and J. Lopez-cuesta, Study of the physico-chemical properties of recycled polymers from waste electrical and electronic equipment (WEEE) sorted by high resolution near infrared devices, Resour. Conserv. Recycl, vol.78, pp.105-114, 2013.

J. L. Bouvard, B. Denton, L. Freire, and M. F. Horstemeyer, Modeling the mechanical behavior and impact properties of polypropylene and copolymer polypropylene, J. Polym. Res, vol.23, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01297868

M. C. Celina, Review of polymer oxidation and its relationship with materials performance and lifetime prediction, Polym. Degrad. Stab, vol.98, pp.2419-2429, 2013.

L. Ciacci, F. Passarini, and I. Vassura, The European PVC cycle: In-use stock and flows, Resour. Conserv. Recycl, vol.123, pp.108-116, 2016.

M. F. Cosate-de-andrade, P. M. Souza, O. Cavalett, and A. R. Morales, Life cycle assessment of poly(lactic acid) (PLA): comparison between chemical recycling, mechanical recycling and composting, J. Polym. Environ, vol.24, pp.372-384, 2016.

F. Cucchiella, I. D'adamo, S. C. Lenny-koh, and P. Rosa, Recycling of WEEEs: an economic assessment of present and future e-waste streams, Renew. Sustain. Energy Rev, vol.51, pp.263-272, 2015.

D. J. Da-silva and H. Wiebeck, Using PLS, iPLS and siPLS linear regressions to determine the composition of LDPE/HDPE blends: A comparison between confocal Raman and ATR-FTIR spectroscopies, Vib. Spectrosc, vol.92, pp.259-266, 2017.

M. Delmas, R. Rossignol, J. B. Rodriguez, and P. Christol, Design of InAs/GaSb superlattice infrared barrier detectors, Superlattices Microstruct, vol.104, pp.402-414, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01626984

E. Dimitrakakis, A. Janz, B. Bilitewski, and E. Gidarakos, Small WEEE: determining recyclables and hazardous substances in plastics, J. Hazard. Mater, vol.161, pp.913-919, 2009.

M. K. Eriksen and T. F. Astrup, Characterisation of source-separated, rigid plastic waste and evaluation of recycling initiatives: effects of product design and source-separation system, Waste Manage, vol.87, pp.161-172, 2019.

C. Gallen, A. Banks, S. Brandsma, C. Baduel, P. Thai et al., Towards development of a rapid and effective non-destructive testing strategy to identify brominated flame retardants in the plastics of consumer products, Sci. Total Environ, pp.255-265, 2014.

F. Gallo, C. Fossi, R. Weber, D. Santillo, J. Sousa et al., Marine litter plastics and microplastics and their toxic chemicals components: the need for urgent preventive measures, Environ. Sci. Eur, vol.30, 2018.

R. Gensler, C. J. Plummer, C. Grein, and H. Kausch, Influence of the loading rate on the fracture resistance of isotactic polypropylene and impact modified isotactic polypropylene, Polymer (Guildf), vol.41, pp.593-598, 2000.

M. R. Gent, M. Menendez, J. Toraño, and I. Diego, Recycling of plastic waste by density separation: prospects for optimization. Waste Manage. Res, vol.27, pp.175-187, 2009.

J. V. Gulmine, P. R. Janissek, H. M. Heise, and L. Akcelrud, Polyethylene characterization by FTIR, Polym. Test, vol.21, issue.01, pp.124-130, 2002.

S. P. Gundupalli, S. Hait, and A. Thakur, A review on automated sorting of sourceseparated municipal solid waste for recycling. Waste Manage, vol.60, pp.56-74, 2017.

H. Hagemann, R. G. Snyder, A. J. Peacock, and L. Mandelkern, Quantitative infrared methods for the measurement of crystallinity and its temperature dependence: polyethylene, Macromolecules, vol.22, pp.3600-3606, 1989.

E. Huerta-lwanga, J. Mendoza-vega, V. Ku-quej, J. Chi, . A. De.los et al., Field evidence for transfer of plastic debris along a terrestrial food chain, Sci. Rep, vol.7, 2017.

A. Jimenez, J. Lopez, A. Iannoni, and J. M. Kenny, Formulation and mechanical characterization of PVC plastisols based on low-toxicity additives, J. Appl. Polym. Sci, vol.81, pp.1881-1890, 2001.

M. R. Jung, F. D. Horgen, S. V. Orski, C. V. Rodriguez, K. L. Beers et al., Validation of ATR FT-IR to identify polymers of plastic marine debris, including those ingested by marine organisms, Mar. Pollut. Bull, vol.127, pp.704-716, 2018.

A. Kassouf, J. Maalouly, D. N. Rutledge, H. Chebib, and V. Ducruet, Rapid discrimination of plastic packaging materials using MIR spectroscopy coupled with independent components analysis (ICA). Waste Manage, vol.34, pp.2131-2138, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01173836

K. M. Kelley, A. C. Stenson, R. Dey, and A. J. Whelton, Release of drinking water contaminants and odor impacts caused by green building cross-linked polyethylene (PEX) plumbing systems, Water Res, vol.67, pp.19-32, 2014.

A. A. Koelmans, E. Besseling, W. J. Shim, T. Kiessling, L. Gutow et al., Marine Anthropogenic Litter, 2015.

A. Küter, S. Reible, T. Geibig, D. Nüßler, and N. Pohl, THz imaging for recycling of black plastics. tm -Tech, Mess, vol.85, pp.191-201, 2018.

L. Magueresse-battistoni, B. Multigner, L. Beausoleil, C. Rousselle, and C. , Effects of bisphenol A on metabolism and evidences of a mode of action mediated through endocrine disruption, Mol. Cell. Endocrinol, vol.475, pp.74-91, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01864337

L. Lebreton, B. Slat, F. Ferrari, B. Sainte-rose, J. Aitken et al., Evidence that the Great Pacific Garbage Patch is rapidly accumulating plastic, Sci. Rep, vol.8, p.4666, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02344826

W. C. Li, H. F. Tse, and L. Fok, Plastic waste in the marine environment: A review of sources, occurrence and effects, Sci. Total Environ, pp.333-349, 2016.

N. Lingaiah, M. A. Uddin, A. Muto, T. Imai, and Y. Sakata, Removal of organic chlorine compounds by catalytic dehydrochlorination for the refinement of municipal waste plastic derived oil, Fuel, vol.80, pp.46-47, 2001.

E. Maris, P. Botané, P. Wavrer, and D. Froelich, Characterizing plastics originating from WEEE: a case study in France, Miner. Eng, vol.76, pp.28-37, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01206310

M. Matiddi, S. Hochsheid, A. Camedda, M. Baini, C. Cocumelli et al., Loggerhead sea turtles (Caretta caretta): a target species for monitoring litter ingested by marine organisms in the Mediterranean Sea, Environ. Pollut, vol.230, pp.199-209, 2017.

I. Muñoz, J. A. Colacino, R. C. Lewis, A. E. Arthur, J. D. Meeker et al., Associations between school lunch consumption and urinary phthalate metabolite concentrations in US children and adolescents: Results from NHANES, Environ. Int, vol.121, pp.287-295, 2003.

I. Noda, A. E. Dowrey, J. L. Haynes, and C. Marcott, Group frequency assignments for major infrared bands observed in common synthetic polymers, Physical Properties of Polymers Handbook, pp.395-406, 2007.

G. L. Oliveira and M. F. Costa, Optimization of process conditions, characterization and mechanical properties of silane crosslinked high-density polyethylene, 2010.

G. Pan, H. Li, and Y. Cao, 1H-NMR investigation of the thermooxidation degradation of poly(oxymethylene) copolymers, J. Appl. Polym. Sci, vol.527, pp.577-583, 2004.

R. M. Patel, P. Saavedra, C. Hinton, and J. Degroot, Comparison of EVA and polyolefin plastomer as blend components in various film applications, J. Plast. Film Sheeting, 1998.

J. R. Peeters, P. Vanegas, K. Kellens, F. Wang, J. Huisman et al., Forecasting waste compositions: a case study on plastic waste of electronic display housings. Waste Manage, vol.46, pp.28-39, 2015.

J. R. Peeters, P. Vanegas, L. Tange, J. Van-houwelingen, and J. R. Duflou, Closed loop recycling of plastics containing Flame Retardants, Resour. Conserv. Recycl, vol.84, pp.35-43, 2014.

D. Perrin, O. Mantaux, P. Ienny, R. Léger, M. Dumon et al., Influence of impurities on the performances of HIPS recycled from Waste Electric and Electronic Equipment (WEEE). Waste Manage, vol.56, pp.438-445, 2016.

K. Pielichowska, Thermooxidative degradation of polyoxymethylene homoand copolymer nanocomposites with hydroxyapatite: Kinetic and thermoanalytical study, Thermochim. Acta, vol.600, pp.7-19, 2015.

K. Pivnenko, M. K. Eriksen, J. A. Martín-fernández, E. Eriksson, and T. F. Astrup, Recycling of plastic waste: Presence of phthalates in plastics from households and industry. Waste Manage, vol.54, pp.44-52, 2016.

S. Pongstabodee, N. Kunachitpimol, and S. Damronglerd, Combination of threestage sink-float method and selective flotation technique for separation of mixed post-consumer plastic waste. Waste Manage, vol.28, pp.475-483, 2008.

M. S. Rabello and J. R. White, The role of physical structure and morphology in the photodegradation behaviour of polypropylene, Polym. Degrad. Stab, vol.56, pp.202-211, 1997.

S. Rahmani, N. Pour-khalili, F. Khan, S. Hassani, E. Ghafour-boroujerdi et al., Bisphenol A: What lies beneath its induced diabetes and the epigenetic modulation?, Life Sci, vol.214, pp.136-144, 2018.

E. Ramírez-vargas, M. Huerta-martínez, B. Javier-medellín-rodríguez, F. Sánchez-valdes, and S. , Effect of heterophasic or random PP copolymer on the compatibility mechanism between EVA and PP copolymers, J. Appl. Polym. Sci, vol.112, pp.2290-2297, 2009.

E. Roumeli, A. Markoulis, K. Chrissafis, A. Avgeropoulos, and D. Bikiaris, Substantial enhancement of PP random copolymer's thermal stability due to the addition of MWCNTs and nanodiamonds: decomposition kinetics and mechanism study, J. Anal. Appl. Pyrolysis, vol.106, pp.71-80, 2014.

O. Rozenstein, E. Puckrin, and J. Adamowski, Development of a new approach based on midwave infrared spectroscopy for post-consumer black plastic waste sorting in the recycling industry. Waste Manage, vol.68, pp.38-44, 2017.

M. Sadat-shojai and G. Bakhshandeh, Recycling of PVC wastes, Polym. Degrad. Stab, vol.96, pp.404-415, 2011.

U. Serincan, B. Arikan, and O. , Direct growth of type II InAs/GaSb superlattice MWIR photodetector on GaAs substrate, Superlattices Microstruct, vol.120, pp.15-21, 2018.

S. Serranti, A. Gargiulo, and G. Bonifazi, Characterization of post-consumer polyolefin wastes by hyperspectral imaging for quality control in recycling processes. Waste Manage, vol.31, pp.2217-2227, 2011.

M. Shamsaei, I. Aghayan, and K. A. Kazemi, Experimental investigation of using cross-linked polyethylene waste as aggregate in roller compacted concrete pavement, J. Clean. Prod, vol.165, pp.290-297, 2017.

C. Signoret, A. Caro-bretelle, J. Lopez-cuesta, P. Ienny, and D. Perrin, MIR spectral characterization of plastic to enable discrimination in an industrial recycling context: I. Specific case of styrenic polymers. Waste Manage, vol.95, pp.513-525, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02424757

L. Steg and C. Vlek, Encouraging pro-environmental behaviour: An integrative review and research agenda, J. Environ. Psychol, vol.29, pp.309-317, 2009.

E. Stenvall, S. Tostar, A. Boldizar, M. R. Foreman, and K. Möller, An analysis of the composition and metal contamination of plastics from waste electrical and electronic equipment (WEEE). Waste Manage, vol.33, pp.915-922, 2013.

G. Takidis, D. N. Bikiaris, G. Z. Papageorgiou, D. S. Achilias, and I. Sideridou, Compatibility of low-density polyethylene/poly(ethylene-co-vinyl acetate) binary blends prepared by melt mixing, J. Appl. Polym. Sci, vol.90, pp.841-852, 2003.

T. Truc, N. T. Lee, C. Lee, B. Mallampati, and S. R. , Development of hydrophobicity and selective separation of hazardous chlorinated plastics by mild heat treatment after PAC coating and froth flotation, The new plastics economy: Rethinking the future of plastics, vol.321, pp.193-202, 2016.

E. Macarthur-found,

R. C. Thompson, C. J. Moore, F. S. Vom-saal, and S. H. Swan, Plastics, the environment and human health: current consensus and future trends, Philos. Trans. R. Soc. B Biol. Sci, vol.364, pp.2153-2166, 2009.

R. Ueno, K. Ishii, K. Suzuki, H. Honda, and H. Funaki, Infrared multispectral imaging with silicon-based multiband pass filter and infrared focal plane array, 2015 9th International Conference on Sensing Technology, pp.211-214, 2015.

C. Wang, H. Wang, J. Fu, and Y. Liu, Flotation separation of waste plastics for recycling-A review. Waste Manage, vol.41, pp.28-38, 2015.

, LCA of Management Options for Mixed Waste Plastics, Waste resource action programme (WRAP), WRAP, 2008.

D. Xanthos and T. R. Walker, International policies to reduce plastic marine pollution from single-use plastics (plastic bags and microbeads): a review, Mar. Pollut. Bull, vol.118, pp.17-26, 2017.

J. Yu, L. Sun, C. Ma, Y. Qiao, and H. Yao, Thermal degradation of PVC: a review. Waste Manage, vol.48, pp.300-314, 2016.

S. Zhou, Z. Wang, Z. Gui, and Y. Hu, A study of the novel intumescent flameretarded PP/EPDM copolymer blends, J. Appl. Polym. Sci, vol.110, pp.3804-3811, 2008.